Can I run MacVidCards flashed graphics card inside a PC?
Yes, you can! All you need is to enable CSM mode in your BIOS. This will let your PC read the PC BIOS on the card instead of EFI for the Mac. You will be still able to run your Windows in UEFI mode.
If you don't see anything on screen with your MacVidCards flashed card, simply use your existing PC card to change a following options and then reinstall MacVidCards graphics card.
PLEASE NOTE: Some latest PC motherboards might not support CSM mode. If your MacVidCards flashed card is a single BIOS (including Vega 56/64 cards dual BIOS cards), then running it in a PC would not be possible.
Step 1To enter BIOS press DEL or F2 key on boot (some computers use F10 key). Use the right arrow to get into Advanced section. |
|
|
|
Step 2Press down arrow a few times and press ENTER key to get into CSM Configuration section. |
|
|
|
Step 3Make sure CSM Support option is set to Enabled.
Change Video option from UEFI to Legacy mode by pressing ENTER key and then use down/up arrows. Leave Network, Storage and Other PCI devices in UEFI mode. |
|
|
|
Step 4Press ESC to go back.
Press right arrow a few times until you get into Exit section.
Press ENTER key on Save Changes & Exit option. |
|
|
|
Step 5Select YES option and press ENTER key to restart the computer.
If you replaced your MacVidCards graphics cards with a PC graphics card, you can now turn off your computer and reinstall your MacVidCards graphics card. It wil start perfectly normal from now on. |